このページの本文へ
About Soil Steamer
HOME -> About Soil Steamer -> Light hose for steam discharge
Light hose for steam discharge (patented)
New product to be replaced with canvas hose
photo:Light hose for steam discharge

Characteristics

photo:Light hose for steam discharge
Two types of hoses are available: blue and green with different number of injection holes.
  • Lightweight plastic material makes it possible to steam the longer area compared to canvas hoses.
  • Because there is no risk of corrosion as it is a chemical product, it is possible to put it in storage immediately after steaming.
  • It is easy to wind up the hose after steaming, as it is light-weighted.
  • The unit price is low: approx. 1/7 of that of canvas hose.
  • The strength of the folded sides is increased. In addition, side reinforcement is applied for easier winding for storage.

Selection guide

Model Total length of ridge to be steamed
SB-700type Green (with many injection holes) ←or shorter 60m or longer→ Blue (with standard injection holes)
SB-550type Green (with many injection holes) ←or shorter 45m or longer→ Blue (with standard injection holes)
SB-400type Green (with many injection holes) ←or shorter 35m or longer→ Blue (with standard injection holes)
SB-300type Green (with many injection holes) ←or shorter 25m or longer→ Blue (with standard injection holes)
SB-200type Green (with many injection holes) ←or shorter 20m or longer→ Blue (with standard injection holes)
SB-150type Green (with many injection holes) ←or shorter 15m or longer→ Blue (with standard injection holes)

Note:

  • Due to consentlated steam injection from injection holes, covering sheet may be partially damaged.
  • The hose life on the whole may be shorter than that of canvas hose.
  • Avoid direct sunlight while in storage.
  • Light hose is an original product of our company. Beware of imitations.

To the top